Descargar Imprimir esta página

Black and Decker BEMW461BH-GB Traducción De Las Instrucciones Originales página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 63
ENGLISH
Do not operate the lawn mower while
u
under the influence of alcohol or drugs,
or when your are tired or ill. Always
stay alert, watch what you are doing,
and use common sense.
Avoid dangerous environments.
u
Never operate the lawn mower in
damp or wet grass, never use lawn
mower in the rain. Always be sure of
your footing, walk, never run.
If the lawn mower should start to
u
vibrate abnormally, release the on/off
switch, wait for the blade to stop and
then check for the cause immediately.
Vibration is generally a warning of
trouble, see the troubleshooting guide
for advise in the case of abnormal
vibration.
Always wear proper eye and
u
respiratory protection when operating
the lawn mower.
The use of any accessory or
u
attachment not recommended for
use with this lawn mower could be
hazardous. Only use accessories
approved by BLACK+DECKER.
Never overreach while operating the
u
lawn mower. Always be sure to keep
proper footing and balance at all times
while operating the lawn mower.
Mow across the face of slopes, never
u
up and down. Exercise extreme
caution when changing direction on
slopes.
Watch for holes, ruts, bumps, rocks or
u
other hidden objects. Uneven terrain
could cause a slip and fall accident.
Tall grass can hide obstacles.
10
(Original instructions)
Do not mow on wet grass or
u
excessively steep slopes. Poor footing
could cause a slip and fall accident.
Do not mow near drop-offs, ditches, or
u
embankments.
You could lose your footing or balance.
Always allow the mower to cool down
u
before storing.
Pull the plug from the socket and pull
the battery pack from the machine. Make
sure that all moving parts have come to a
complete stop:
Whenever you leave the machine;
u
Before clearing a blockage;
u
Before checking, cleaning or working
u
on the appliance.
Vibration
The declared vibration emission values
stated in the technical data and the
declaration of conformity have been
measured in accordance with a standard
test method provided by EN50636 and
may be used for comparing one tool with
another. The declared vibration emission
value may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission value
during actual use of the power tool can
differ from the declared value depending
on the ways in which the tool is used.
The vibration level may increase above
the level stated.
When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly
using power tools in employment, an
estimation of vibration exposure should

Publicidad

loading

Este manual también es adecuado para:

Bemw461bhBemw471bhBemw481bh