General safety
WARNING — Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance.
WARNING — If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
WARNING —Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING — Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
WARNING — Do not damage the refrigerant circuit.
WARNING — Do not use electrical appliances inside the beverages' storage
compartments of the appliance, unless they are of the type recommended by the
manufacturer.
WARNING — The refrigerant and insulation blowing gas are flammable. When disposing
of the appliance, do so only at an authorized waste disposal center. Do not expose to
flame.
Refrigerating fluid
The refrigerating circuit in the appliance uses refrigerating isobutene (R600a), which is a
highly inflammable natural gas and is therefore dangerous for the environment. When
transporting or installing the appliance, ensure that no element of the refrigerating circuit
is damaged. The refrigerating fluid (R600a) is inflammable.
Caution risk of fire
If the refrigerant circuit should be damaged:
▪ Avoid opening flames and sources of ignition.
▪ Thoroughly ventilate the room in which the appliance is situated.
It is dangerous to alter the specifications or modify this product in any way. Any damage
to the cord may cause a short circuit, fire, and/or electric shock.
Electrical safety
▪ We cannot be held responsible for any incident caused by improper electrical
installation.
▪ The power cord must not be extended. Do not use an extension cord, adapter or
multiple sockets.
▪ Make sure that the power plug is not crushed or damaged. A crushed or damaged
power plug may overheat and cause a fire.
▪ Make sure that you can access the main plug of the appliance.
▪ Do not pull the main cable.
▪ The power cord must not be lengthened.
▪ Never remove the ground connection.
▪ If the power plug socket is loose, do not insert the power plug. There is a risk of
electric shock or fire.
13