Publicidad
Idiomas disponibles
Idiomas disponibles
▪ It is advisable to wait at least two hours before connecting the appliance to allow
the oil to flow back in the compressor.
▪ Adequate air circulation should be around the appliance, lacking this leads to
overheating. To achieve sufficient ventilation, follow the instructions relevant to
installation. Wherever possible the back of the product should not be too close
to a wall to avoid touching or catching warm parts (compressor, condenser) to
prevent the risk of a fire, follow the instructions relevant to installation. Make
sure that there is a clearance of 150 mm (15 cm) between the wall and the rear
side of your cooler when you are bringing the product close to the wall.
▪ The appliance must not be locating close to radiators or cookers.
▪ Make sure that the mains plug is accessible after the installation of the
appliance.
Energy Saving Tips
▪ The cooler should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of direct sunlight.
▪ Let hot beverages cool to room temperature before placing in the cooler.
Overloading the cooler forces the compressor to run longer.
▪ Organize and label beverages to reduce door openings and extended searches.
Remove as many items as needed at one time, and close the door as soon as
possible.
▪
Cooler storage bin should not be lined with aluminum foil, wax paper, or paper
toweling. Liners interfere with cold air circulation, making the cooler less
efficient.
Recommendation combination
▪ The following combination of drawers, baskets, and shelves is recommended for
energy to be used as efficiently as possible by the refrigeration unit.
Service
▪ Any electrical work required to do the servicing of the appliance should be
carried out by qualified electrician or competent person.
▪ This product must be serviced by an authorized Service Center, and only
genuine spare parts must be used.
Aesthetic and functional spare parts in accordance with REGULATION (EU) 2019/2024 (Annex II,
point 2.), are available for after sales service network and end users for a maximum period of 8
years from the date of end of commercialization on the market of the last unit. The list of spare
parts and the procedure for ordering them (professional access / end user access) are available
on the following website:
Services, 143 Bd Pierre Lefaucheux - 72230 ARNAGE.
For other functional spare parts not specified in EU regulation 2019/2024, they are available for a
period of 7 years.
The manufacturer's warranty is 1 year for functional parts.
www.interfroidservices.fr
15
or by post at the following address: Interfroid
Publicidad
