Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Digital Multimeter for
-
DC voltage measurement
-
AC voltage measurement
-
DC current measurement (BENNING MM 5-2)
-
AC current measurement (BENNING MM 5-2)
-
Resistance measurement
-
Diode testing
-
Continuity testing
-
Capacity measurement
-
Frequency measurement
-
Temperature measurement (BENNING MM 5-2)
Contents:
1.
Operating instructions
2.
3.
4.
5.
6.
7.
8.
9.
1.
Operating Instructions
This operating manual is intended for:
-
electricians and
-
qualified electrotechnical persons
The BENNING MM 5-1/ MM 5-2 is designed for measurements in dry surround-
ings. It must not be used in electrical circuits with rated voltages higher than
600 V DC/ AC (for more details, see section 6 "Ambient conditions").
The following symbols are used in the operating manual and on the
BENNING MM 5-1/ MM 5-2 itself:
Warning of electrical danger!
Indicates instructions which must be followed to avoid danger to
persons.
Important, comply with the documentation!
The symbol indicates that the information provided in the operating
instructions must be followed with in order to avoid risks.
This symbol on the BENNING MM 5-1/ MM 5-2 indicates that the
unit is protection insulated (safety class II).
This symbol on the BENNING MM 5-2 indicates the fuses which
it contains.
This symbol on the BENNING MM 5-1/ MM 5-2 means that the
BENNING MM 5-1/ MM 5-2 complies with the EU directives.
This symbol appears on the display for a discharged battery.
This symbol indicates the "continuity-testing" application. The
buzzer provides an audible signal.
This symbol indicates the "diode-testing" application.
This symbol marks the range "capacity testing".
(DC) voltage or current.
(AC) voltage or current.
Earth (voltage to earth).
10/ 2015
Operating Manual
BENNING MM 5-1/ MM 5-2
BENNING MM 5-1/ 5-2
19
Publicidad
Capítulos
Tabla de contenido
