Hoover HOSR5918EIXK Instrucciones De Uso página 25

First use
Cleaning
the
interior
How to use the dispenser?
You can get cubed ice, crushed ice and cooling water by pressing the paddle switch, which is
selected by displaying the operation panel;
Note! If the paddle switch is pressed continuously for more than 3 minutes, the dispenser will stop
working to protect the electrical components. If you need more cooling water or ice, you can release
the paddle switch and press it again to get more water or ice as you want.
Get cooling water
Select the cooling water mode
switch to receive water, and stop pressing the paddle switch after taking an appropriate amount of
water, and the water will stop flowing automatically.
Note!
• Wait for 2 seconds before taking the cup away to avoid the water splash out.
• If cooler water is needed, fill the glass with ice before taking;
• If more than 800ml of water is taken at one time, water with high temperature may be taken out. In
this case, it is recommended to wait half an hour for a cold drink;
Get ice
Select the cube ice mode
Place the cup in the middle of the paddle switch, press the paddle switch to receive ice, and stop
pressing the paddle switch after taking an appropriate amount of ice, and the ice will stop flowing
automatically.
Note!
• Wait for 2 seconds before taking the cup away to avoid the ice splash out.
• To prevent ice from falling out of the cup, place the cup as close to the dispenser outlet as possible.
• When taking ice, the internal motor runs to churn ice and break ice, which may produce some noise.
• After taking ice, please use it as soon as possible to avoid melting ice.
, place the cup in the middle of the paddle switch, press the paddle
or crushed ice mode
23
Cubed ice, crushed ice,
cooling water mode
Paddle switch
to get ice type as you want.