Epson TM-J2000 Manual Del Usuario página 7

Power Switch and Power Switch Cover
The power switch is on the front of the printer. Press it to turn on
the printer, and press and hold it for more than 3 seconds to turn
off the printer.
Note:
Never turn off the printer when the POWER LED is flashing.
Power Switch Cover
You can use the enclosed power switch cover to make sure that the
power switch is not
place to install it.
WARNING:
If an accident occurs when the power switch cover is attached,
immediately unplug the power supply cable to avoid fire.
If you are going to store the printer or leave it unused for a long
time, turn it off using the power switch on the printer.
Installing or Replacing a Paper Roll
CAUTION:
Be sure to use roll paper that meets the specifications.
Do not touch the autocutter blade, which is on the exit part of the
paper roll cover.
Follow these steps:
1. Make sure the printer is on.
accidentally pressed. Just press the cover into
TM-J2000/J2100 User's Manual 5
English
power switch
power switch cover