Descargar Imprimir esta página

Reliable Enviromate T630 Manual De Instrucciones página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

ATTACHMENT COUPLINGS
If the attachment connections dry up after intensive use, put a small amount of
lubricant (Vaseline) around the O-rings on the male attachment.
TECHNICAL DESCRIPTION
120V Power
Cold water tank capacity
Working pressure
Safety valve
REPLACEMENT & OPTIONS
#3KSPGS010
#3KSPGS015
#3KSPGS025
#7TPAC0200
#7ZSODC030
TROUBLESHOOTING
Do not operate the steam cleaner with a damaged cord, plug or if the steam
cleaner has been dropped or damaged. To avoid risk of electric shock, do not
disassemble or attempt to repair the unit on your own. Return the unit to Reliable
Corporation (see warranty) for examination, repair or replacement.
PROBLEM
No steam is released through
the steam fittings.
Drops of water leak from the
attachments.
Dirty water is coming out.
Not enough steam pressure.
09
1750W
2L
4bar
Yes
Nylon brush
Brass brush
Stainless steel brush (not supplied with steam cleaner)
Replacement cloths (2/pack)
Cleaning powder
POSSIBLE CAUSES
1. Steam unit is not turned on.
2. Water tank is empty.
3. Unit is not plugged in.
4. Generator is not fully
heated.
1. Unit is not fully heated.
2. Condensation was created
from non-use.
1. Scale may have built up.
1. The dial on the handle may
be set too low.
REMEDy
1. Turn steam unit onto the
2nd position.
2. Put required amount of
water into tank.
3. Plug unit into outlet.
4. Wait for light (3) to turn on.
1. Wait for light (3) to turn on.
2. Let water run through sys-
tem until steam comes out.
1. Follow cleaning instructions
in book.
1. Turn the dial until the de-
sired pressure is reached.

Publicidad

loading