Procusini mini Manual página 14

Safety instructions
The Procusini
!
during operation.
Always grip the cartridge holder at the bottom. Otherwise there is a risk of
!
crushing.
There is a potential risk of burns. The cartridge holder can get hot up to 40 °C
!
(104 °F). Always allow the stainless steel cartridge to cool down completely
before removing it.
If you open the cartridge holder during operation, the heater switches off
!
automatically for safety reasons and shows "Temperature Error!" on the display.
Close the cartridge holder. Switch the machine off and then on again.
!
For best results, please always produce at a room temperature of 20 ­ 22 °C.
!
Protect your Procusini
Only clean the cartridge holder with a damp kitchen towel, not under running
!
water or in the dishwasher.
Content
1. Accessories
2. Device
3. Start screen & functions
4. 3D Choco Refills and own chocolate
5. Print 3D Choco Refills/own chocolate
6. Printing on chocolate bars & objects
7. Procusini Club ­ Create 3D objects
8. Update
9. Adjusting printing nozzle distance
10. Cleaning
11. Troubleshooting
1. Accessories
Power supply unit
•
Stainless Steel Cartridge
•
Silicone Mat
•
Cartridge Holder
•
SD Card incl. USB Adapter
•
mini has moving parts. Keep your hands out of the printing area
®
® mini from draughts during printing.
14
15
15
17
18
22
23
23
23
24
25
14