Procusini mini Manual página 23

7. Procusini Club ­ Create 3D objects
• Open the browser Google Chrome and type www.procusini.club into the
search bar.
• Register in the Procusini Club with your e­mail address and the serial number of
your Procusini mini. Under the "Login button" you will find the link to register
"Register here".
• You will find the serial number on the back of your Procusini mini
on the type plate (e.g. GM22203220000).
• You will receive a confirmation email, please also check spam!
NOTE
• To create an object with the Procusini Club, you need a computer with an
!
Internet connection.
• Always use the browser Google Chrome to log into the Procusini Club,
otherwise errors may occur.
The Google Chrome browser can be installed free of charge.
Once you have successfully registered in the Procusini Club, select your desired
application or a 3D object from the template library.
After you have created your personal 3D object, you can download the
file for printing and save it on the SD card of the Procusini mini via the SD
to USB adapter.
8. Update
In case of an update, you will be informed via the notification function in the
Procusini Club. You can download the necessary update files and instructions in
"Tips & Tricks" under "Update".
You need the serial number of your device for the software update. You will find
it on the back of your Procusini mini. You can find your current software version in
the display under "Info" in the settings.
9. Adjusting printing nozzle distance
If the distance between the cartridge and the silicone mat on the printing
table is not optimal, it can be adjusted using the adjusting wheel
(chapter 2, no. 9) on the side of the device. To do this, select "Menu", "More" and
press "Calibration".
If you turn the wheel towards the front of the Procusini mini, the distance
increases. Towards the rear it decreases. The distance should be 0.1 ­ 0.2 mm.
NOTE
!
This setting should only be made in exceptional cases.
If you have any questions, please contact us at service@procusini.com.
EN
23