Procusini mini Manual página 17

4. 3D Choco Refills and own chocolate
The Procusini mini allows both the use of Procusini mini 3D Choco Refills and the
use of your own chocolate.
NOTE
After switching on, you will be asked how you would like to work ­ with
! !
Procusini mini 3D Choco Refills or with your own chocolate. As long as
the device is switched on, it remains in the selected mode.
If you switch it off and on again, the prompt appears again.
Procusini mini
3D Choco Refills
When using the 3D Choco Refills, the machine works with presets. This simplifies
operation and leads to quick results.
When using your own chocolate, the Procusini mini allows you to make individual
settings for preheating temperature, preheating time, printing temperature, flow
rate and speed. The quality of the printing result depends on the suitability of the
chocolate used for 3D printing as well as the settings selected. This requires
intensive testing and trial and error.
The Procusini mini offers two ways to work with your own chocolate:
• tempered chocolate filled into the preheated empty stainless steel cartridge
• cooled chocolate: melted chocolate that has hardened in the stainless steel
cartridge or a stainless steel cartridge filled with fine pieces of chocolate
pressed together.
NOTE
Tip: To familiarise yourself with the Procusini mini, we recommend
! !
starting with 3D Choco Refills.
This way you will successfully produce your first chocolate objects
within a few minutes.
Own
chocolate
Select the desired mode.
EN
17