Attach the disc drive
Place your console on a soft cloth spread over a flat surface before attaching your disc
drive�
1
Remove the
cover (page 7).
For safety warnings or details about removing or attaching covers, see "Remove and
attach covers"�
cover
2
Align the disc drive's clips with the 2 holes (marked with
firmly push in until you hear a "click".
3
Attach the
cover (page 7).
Make sure to attach the cover for consoles with the disc drive installed�
4
Attach the feet, connect the power cord and cables, and then turn on
the console.
Make sure to attach the feet for consoles with the disc drive installed�
Remove the disc drive
Place your console on a soft cloth spread over a flat surface before removing your disc
drive�
1
Remove the
For safety warnings or details about removing or attaching covers, see "Remove and
attach covers"�
2
Use your finger to lift up the concave part of the disc drive and remove
it.
), and then
3
Attach the
Make sure to attach the cover for consoles without a disc drive installed�
4
Attach the feet, connect the power cord and cables, and then turn on
the console.
Make sure to attach the feet for consoles without a disc drive installed�
Attach or remove the disc drive
cover (page 7).
cover (page 7).
EN
Concave part
11