ASSEMBLY
TOOLS REQUIRED:
• Two (2) 9/16" Wrenches
ASSEMBLY INSTRUCTIONS: (SEE FIGURE 1)
1. Insert the output shaft of the transmission (A) in the open end of
the Flex Coil ShockTop (B).
2. Line up the bolt holes through the Flex Coil ShockTop and the output
shaft of the transmission.
3. Place the included 3/8-16 x 1.5 inch bolt (C) through the bolt hole.
4. Hand-thread the 3/8-16 nut (D) on the bolt.
5. Using two 9/16 inch wrenches, securely tighten the nut and bolt.
E43 and EA8F shown. Instructions also apply to EA6F and EA10F
augers.
6. Hand thread fishtail point (E) in bottom open end of auger stem (F).
(Powerhead with included 8 inch auger only, model 22777)
SOUND AND VIBRATION LEVELS
Model
Operator Ear
L
(dBA)
PA
E43
100
Model
Hand/Arm Vibration
Max m/s
E43
16.1
Sound levels tested in accordance with ISO3744 & ISO 11201 - Grade 2
(Engineering ) Method. Readings taken with engine at full throttle.
EAV = Exposure Action Value, ELV = Exposure Limit Value
SPECIFICATIONS
Displacement/Cycle
Ignition Type
Cooling System
Output Shaft Torque
Spark Plug Type
Recommended Fuel Type
Fuel Tank Capacity
Start Type
Output Shaft Speed at Max Torque
Output Shaft Speed at Max Power
Net Weight (No Auger)
Overall Dimensions
8
Sound Power Level
L
(dBA)
WA
106
2
43 cc; 2-cycle
Electronic ignition
Forced air cooling
46.5 ft. lb.
SEE PARTS BREAKDOWN
Minimum 87 octane gasoline with
LOW ethanol content
NOTE: If using an ethanol blended
fuel, a fuel stabilizer, mixed to
manufacturer specifications, is
recommended
0.3 gallon (1.14 liters)
Recoil
167 RPM
217 RPM
24 lb (9.53 kg)
22.6" x 13.4" x 11.0" (574mm x
339mm x 279mm)
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
C
Figure 1
WARNING
DO NOT REFUEL WHILE SMOKING, NEAR OPEN FLAME,
OR OTHER POTENTIAL HAZARDS.
FUEL IS HIGHLY FLAMMABLE AND MUST BE HANDLED
WITH CARE. NEVER FILL THE TANK WHEN THE ENGINE
IS HOT OR RUNNING. ALWAYS MOVE OUTDOORS TO
FILL THE TANK.
Operator's Manual
1-Man Earth Auger Powerhead
A
D
B
F
E