Manual Operation; Declaration Of Conformity - Erreka VULCAN D Manual Del Instalador

DESCRIPTION OF THE PRODUCT
5

MANUAL OPERATION


In the case of need, the gate may be operated manually:
• In locked models, it is necessary to first run the
unlocking mechanism.
Locked
6

DECLARATION OF CONFORMITY

Erreka Automatismos declares that the VULCAN D
electromechanical operator has been designed for use
in a machine or for assembly along with other elements
in order to form a machine in line with Directive 2006/
42/EC.
The VULCAN D electromechanical operator allows
installation in line with Standards
EN 13241-1 and EN 12453, provided it is correctly
installed. The installer shall be responsible for proper
installation.
46
Installation Manual
3
3
E240B
Unlocked
• In unlocked models, the gate can be moved
manually without unlocking them, but at a speed
similar to the operator speed. To move it more
quickly, first unlock the operator in order to free the
gate.
Unlocking for manual operation
1 Lift the cover and introduce the key (1) in the
unlocking screw (2).
2 Turn the unlocking key 90º until it is perpendicular
to the operator spindle. The operator is unlocked.

The gate can now be moved manually.
3 Close the cover (1).

THE COVER (1) MUST BE CLOSED.
Locking for automatic operation
1 Lift the cover and introduce the key (1) in the
unlocking screw (2).
2 Turn the unlocking key in any direction until it is
parallel to the operator spindle. The operator is
locked.

Remove the key.
3 Close the cover (1).

THE COVER (1) MUST BE CLOSED.
The VULCAN D electromechanical operator complies
with safety legislation in line with the following
directives and standards:
• 2006/95/EC (low voltage materials)
• 2004/108/EC (electromagnetic compatibility)
• UNE-EN 60335-1