Installation; Required Tools; Initial Conditions And Checks; Environmental Conditions - Erreka VULCAN D Manual Del Instalador

INSTALLATION

1

REQUIRED TOOLS

Set of screwdrivers
Fixed wrenches
Socket wrench (8 mm)
Set of Allen keys
Lubrication grease (graphite or lithium grease)
2

INITIAL CONDITIONS AND CHECKS

Initial conditions of the gate

Check that the size of the gate is within the
admissible range of the operator (see the
technical features of the operator).

If the gate to be automated has a personnel
door, use a safety device to prevent the
operator from running with the personnel door
open.

The gate must have an opening and a closing
stopper.

Environmental conditions


This device is not suitable for installation in
inflammable or explosive environments.
Electrical power supply installation

The electrical connections must be made in line
with the instructions in the control board
manual.

The electrical cable section is indicated in: "Fig. 1
Elements of the complete installation" on page 43.
48
Installation Manual
Marker pencil
Spirit level
Tape measure
Welding machine

Use the welding machine in line with the user
manual.

The gate must be easy to handle manually, namely:
• It must be balanced, in order to ensure the effort
made by the motor is minimum.
• There should be no stiffness throughout its open/
close.

Do not install the operator in a gate which does
not work correctly in manual operation, as this
may lead to accidents. Repair the gate before
installing.

Check that the admissible environmental
temperature range for the operator is suitable
for the location.