Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Charging terminals
5.
Water inlet
6.
Water tank
7.
Bracket anchor button
8.
Mop bracket
9.
Mop
Please note
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
•
This robot vacuum cleaner includes a package designed to protect it during transport.
Take the robot vacuum cleaner out of the box. Keep the original box and other elements
in a safe place, as this will help you prevent damage to the robot vacuum cleaner when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
•
Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the official Cecotec Technical
Support Service.
Warnings
•
Remove all objects around the robot vacuum cleaner such as clothing, papers, cables,
curtains, or other fragile objects which may block or slow down the operation of the
robot vacuum cleaner. Fig. 4
•
If the room to be cleaned is near a balcony or stairs, a physical barrier should be placed
to prevent the robot vacuum cleaner from falling and getting damaged, thus ensuring
safe operation. Fig. 5
•
Do not use the robot vacuum cleaner for liquids. Fig. 6
•
Direct exposure to sunlight or heavy light contrasts may affect the correct operation of
the sensors. If this happens, the robot vacuum cleaner will cease operation. Move it to a
new location for it to start running again.
•
Please note that the total height of the robot vacuum cleaner is 9,3 cm and the sensors
are at the bottom, so it is advisable to prevent access to all areas below 9,3 cm to avoid
damaging the laser.
Installing the robot vacuum cleaner and the self-emptying base
1.
Place the self-emptying base against a wall and leave a minimum free space of 1.5
metres to the front and 0.5 metres to each side. Fig. 7
CONGA 8290 IMMORTAL ULTRA POWER HOME X-TREME
ENGLISH
53
Publicidad
