cecotec CONGA 8290 IMMORTAL ULTRA POWER HOME X-TREME Manual De Instrucciones página 56

ENGLISH
base to recharge. The self-emptying base will empty the dirt tank based on the emptying
scheduled selected on the app.
• If the robot vacuum cleaner is charging in the self-emptying base, you can force the
robot to self-empty. To do so, press the Self-emptying option in your application.
3. OPERATION
Robot vacuum cleaner's buttons
Auto Mode
• Press the Start/Pause button on the robot vacuum cleaner or select it in the app to
make it start cleaning automatically in Edge mode and then perform a cleaning cycle in
an orderly zigzag pattern while it also recognises which areas have been cleaned and
which have not. The robot vacuum cleaner will automatically plan the cleaning route
during cleaning.
• If you control the robot vacuum cleaner manually during this mode, the robot will
recalculate the route, so it may pass through already cleaned areas. To ensure efficient
cleaning, do not operate the robot vacuum cleaner manually during automatic cleaning.
• Thanks to its Total Surface 2.0 technology, if the battery is low during the cleaning cycle,
the robot vacuum cleaner will smartly return to the charging base automatically and
once fully charged, it will resume the cleaning process from the same point.
• During cleaning, the robot vacuum cleaner will stop briefly to evaluate the area and
calculate the cleaning route (this stop will vary depending on the house conditions).
Back Home mode
• Press the Back Home button on the robot vacuum cleaner or from the app to send the
robot vacuum cleaner to the self-emptying base. The robot vacuum cleaner will stop
vacuuming until it reaches the base.
• This mode can be activated during any cleaning cycle.
• The robot vacuum cleaner will take the shortest route back to the self-emptying base
thanks to its map-memorisation feature and the smart Back Home function.
• Upon completing a cleaning cycle or when the battery is low, thanks to its TotalSurface
2.0 technology, the robot vacuum cleaner will automatically return to the self-emptying
base to avoid running out of battery. Once the robot has recharged, it will resume
cleaning from the point it has stopped.
Note
The robot vacuum cleaner will not be able to return to the self-emptying base if it can't easily
access it. If this happens, manually place it in the self-emptying base.
56
CONGA 8290 IMMORTAL ULTRA POWER HOME X-TREME