cecotec CONGA 8290 IMMORTAL ULTRA POWER HOME X-TREME Manual De Instrucciones página 63

The robot vacuum cleaner
did not carry out the
scheduled cleaning task
The robot vacuum cleaner
does not return to the
self-emptying base after
finishing Spot cleaning
or changing the starting
position
The robot vacuum cleaner
does not resume cleaning
The robot vacuum cleaner
is always offline
The connection between
the smartphone and the
robot vacuum cleaner
failed
Check if the robot vacuum cleaner is in Sleep mode and
change mode. This option can be found on the general
settings of the robot vacuum cleaner and allows you to
define time slots in which the robot will not perform the
scheduled cleaning tasks when in Sleep mode.
Ensure proper connection of the robot vacuum cleaner to the
Wi-Fi: you will not be able to carry out scheduled cleaning
without connection and with a low battery.
The robot vacuum cleaner will map and calculate a new
route after running in Spot cleaning mode or after changing
its starting position.
If the self-emptying base is too far away from the robot
vacuum cleaner, the latter won't be able to return to the
base. Manually move the robot vacuum cleaner close to the
self-emptying base.
Make sure the robot vacuum cleaner is not in Sleep mode, as
it will not resume cleaning in this mode.
When manually placed in the self-emptying base, the robot
will not resume cleaning.
Make sure the robot vacuum cleaner is successfully
connected to a 2.4 GHz network and always in areas with
good Wi-Fi signal.
Make sure the robot vacuum cleaner and the self-emptying
base are in an area with good Wi-Fi signal, reset the router,
and retry connection.
CONGA 8290 IMMORTAL ULTRA POWER HOME X-TREME
ENGLISH
63