HT SOLAR03 Manual De Instrucciones página 30

SOLAR03
HT ITALIA
S/N: 23123458
HW: 1.00 – FW: 1.02
Calibration Date:
22/03/2023
22/03/23 – 15:35
Irr. F Irr. BH Irr. BL Tmp/A
[Off] [Off] [Off]
4.3. SWITCHING ON/OFF THE INSTRUMENT
1. Press and hold the key
instrument.
2. The screen to the side indicating the model, manufacturer, serial
number, internal firmware (FW) and hardware (HW) version,and
the date of the last calibration is shown by the unit for a few
seconds
3. The screen to the side, which indicates that no probe is
connected (indication "Off") to inputs INP1... INP4 is shown on
the display. The meaning of the symbols is the following:
➢ Irr. F → Irradiance of the module's front (monofacial)
[Off]
➢ Irr. B H
back
➢ Irr. B L
module's back
➢ Tmp/A → Cell temperature / tilt angle of the module with
regard to the horizontal plane (tilt angle)
➢ → Symbol of active Bluetooth connection (steady on the
display) or searching for a connection (flashing on the
display)
4. Press and hold the
unit
for approx. 3s to switch on/off the
→ Irradiance of the top part of the (Bifacial) module's
→ Irradiance of the bottom part of the (Bifacial)
key for a few seconds to switch off the
30
SOLAR03