cecotec BOLERO HEXA Manual De Instrucciones página 83

Maximum operation time
The maximum operation time on this device is 9 hours, so that the circuit breaker does not trip.
Replacing of the light bulb inside the oven. Fig. 18
If the oven light bulb does not work, please contact the official Cecotec Technical Support
-
Service.
The replacement of the light bulb must be carried out by the official Cecotec Technical
-
Support Service or by a qualified technician.
Lamp type > heat-resistant halogen bulb, 25 W, 230 V.
-
Warnings
Danger of electric shock: when replacing the bulb, the contacts of the bulb socket will be
-
live. Unplug the appliance from the mains or switch off the circuit breaker of your home.
Risk of burns: the appliance can reach high temperatures during operation. Never touch the
-
internal surface of the appliance nor the heating elements. Allow the device to completely
cool down. Keep children away from the device.
1. Place a kitchen towel in the oven when it is cold to prevent it from spoiling.
2. Turn the glass cover counterclockwise to remove it (corner bulb). Pull the side grille
outwards and then pry it slightly with a flat screwdriver to remove the glass cover (side
bulb).
3. Pull out the bulb, do not turn it.
4. Screw the glass cover back on.
5. Remove the kitchen towel and switch on the circuit breaker to see if the bulb lights up.
6. After checking that the bulb works after replacing it, do not forget to replace the side grille.
Glass lid
If the glass cover of the halogen bulb is damaged, please contact the official Cecotec Technical
Support Service.
BOLERO HEXA SM406000 EDGE+ A+ / BOLERO HEXA SM406000 GLASS BLACK A+ / WHITE A+ / GREY A+
ENGLISH
83