Publicidad
Idiomas disponibles
Idiomas disponibles
10
Shutdown
10.1
Dismounting
Aids
Requirements:
•
The system has been de-energized and secured against being switched on again.
Procedure:
1. Unlock the snap-in hook on the housing front.
2. Remove the housing front and place it down, taking care to protect it from pollutants.
3. Disconnect the electrical connection.
4. Undo the fastening screws.
5. Remove the housing rear.
10.2
Returns
Procedure:
1. The
supplementary sheet for product returns
close it with the shipping documents and attach it to the packaging, ideally on the outside.
2. Use the original packaging or a suitably secure container for sending the device.
10.3
Disposal
DISPOSAL
•
Do not dispose of the device or replacement parts in the trash bin after use.
•
Delete programs and data stored on the device.
•
Remove any inserted batteries if that is possible without damaging the device.
•
Dispose of the device as well as packaging properly and in an environmentally friendly manner.
•
Observe country-specific laws and regulations for waste management and disposal.
According to Directive 2012/19/EU on Waste Electrical and Electronic Equipment, manufacturers are re-
quired to offer the option of returning old equipment. Contact the manufacturer for a return.
Screwdriver
must first be completed correctly and signed. Then en-
10 Shutdown
19
Publicidad
