Empty water tank indicator
When there is too little water in the water tank, your generator will make a rattling sound and the steam
will stop. The steam generator will stop working until enough water is refilled. After you put the water
reservoir back in, the water will start heating up. This will cause you to hear another rattling sound, this is
normal. If you have not filled the water tank sufficiently, the water will not be pumped to the iron.
Descale indicator
This light will come on when the steam generator needs descaling. When you have removed all the
limescale, the light will turn off again. You can read about the correct descaling process under the
"Descaling" section. Repeat this process until the light goes out. This will prolong the life of your
appliance.
Ironing tips
·
Always check first if there is a label attached to the garment with instructions for ironing. If so, always
follow these instructions.
·
The iron heats up faster than it cools down. Therefore, always iron garments that need the lowest
temperature first, such as synthetic fabrics.
·
If a fabric consists of several types of fibres, always choose the lowest temperature to iron the
combination of these fibres.
·
Silks and other fabrics that shine should be ironed along the inside.
·
Velvet and other fabrics that become shiny quickly should be ironed with light pressure in one
direction. Keep the iron moving at all times.
·
Fabrics that are 100% wool may be ironed with steam. Turn the temperature to maximum and use a
dry cloth to place on the fabric.
·
Never iron over zips or other metal objects in a garment. This can damage the soleplate. Always iron
around such objects.
Note: When ironing woollen fabrics, the fabric may become shiny. Therefore, turn the garment inside out
to iron it.
Carrying release
Place the iron on the thermal insulation pads.
Press the large carry release button, the one with the closed lock icon.
You can now carry the iron using the handle.
To iron, press the small button of the carry o,trlock, the button with the icon with open lock.
CLEANING AND MAINTENANCE
Unplug the appliance and let it cool down before cleaning it.
Wipe off residues on the ironing soleplate with a damp cloth or with a non-caustic (liquid) cleaning
product.
Note: Do not use chemical, steel, wooden or abrasive products to scrub the soleplate clean.
Clean the upper part of the iron with a soft, damp cloth.
Wipe away drips on the steam generator and clean the thermal insulation pads with a dry cloth.
When not using the steam generator for a long time, pour the water out of the water tank and put the iron
on the thermal insulation pads to put it away.
Wind the steam hose and cord around the appliance in the groove provided.
www.domo-elektro.be
39
DO7115S