Domo DO7329H Manual De Instrucciones página 31

BEFORE THE FIRST USE
· The heater should only be operated at a minimum distance of 50 cm from any wall or other object that
could disturb its operation.
· Position the air flow in order to optimise the heating of the room. Avoid corners, small volumes, floors
and ceilings.
· Place the appliance on a smooth, stable surface.
· When the appliance is switched on for the first time, a slight smell may be emitted. Please ensure
sufficient ventilation. This smell will disappear very quickly.
USE
1. Plug the power cord into a socket
2. Turn the mode dial to the desired position. You can choose between: fan mode, heating mode I (750
W) or heating mode II (1,500 W). The higher you set the wattage, the faster you heat the space.
3. Turn the temperature control knob to the desired setting. The appliance's temperature range is 5 to
35 °C.
4. When the indicator light is on it means the unit is working.
5. The unit stops heating when the set temperature is reached. You can turn off the device by turning
the mode dial back to 0.
6. Unplug the appliance from the power socket when not using it.
SAFETY DEVICES
· This heater is protected with an overheat protection that switches off the heater automatically in case
of overheat, e.g. due to the total or partial obstruction of the grids. The overheating shut-off switches
off the temperature inside when the appliance exceeds the normal running temperature. The heating
element will automatically stop working, the motor will continue to operate, the internal heat shed.
This protective device applies only to the appliance itself and has no influence on room temperature
regulation. In this case, unplug the appliance, wait about 10 minutes for it to cool and remove the
object that is obstructing the grids. Then switch it back on as described above. The appliance should
operate normally. Should the problem persist, please contact the nearest customer service. When the
appliance turns on this safety feature, the fan indicator will light up and the low temperature indicator
light will flash.
· The appliance is also equipped with a tip-over safety, which is integrated in the appliance. The
appliance will turn off when it tips over.
CLEANING AND MAINTENANCE
· Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down
completely.
· To avoid the risk of electric shock, do not clean the heater with water and do not immerse it. Clean the
housing with a damp cloth.
· If necessary, dust particles accumulated in the air outlet openings may be removed with a vacuum
cleaner. This maintenance should be done regularly to assure the good operation of the appliance.
Dust particles in the appliance may cause over-heating.
· Allow the unit to cool down completely before storing it.
· Store the appliance in a clean and dry place.
· You can easily move the device thanks to the handles.
www.domo-elektro.be
31
DO7329H