LG WM3455H Serie Guía Del Usuario E Instrucciones De Instalacion página 31

ThOU [ES OOTING
BEFORE cALLiNG FOR SERvicE (Cont.)
The display shows:
The display shows:
I t t-
co|
The display shows:
I J-t-
FC
The display shows:
I j_t-
FC
The display shows:
| LE|
The display shows:
I! PF!
Staining
Wrinkling
The display shows:
| i1,-|
[] onE|
• Load is too small.
Load is out of balance.
The washer has an imbalance
detection and correction
system. If individual heavy
articles are loaded (bath
mat, bath robe, etc.) and the
imbalance is too great, the
washer will make several
attempts to restart the spin
cycle. If an imbalance is still
detected, the washer will stop
and the error code will be
displayed.
Control error.
Water level is too high due to
a faulty water valve.
The water level sensor is not
working correctly.
Thermal overload protection
circuit in the motor has been
tripped.
A power failure has occurred.
Add laundry products to the
washer drum.
Washer not unloaded
promptly.
Does not properly sort the
clothes.
Washer not unloaded
promptly.
Washer overloaded.
Hot and cold water inlet
hoses are reversed.
• Check water supply.
• Add 1 or 2 similar items to help balance the load.
Rearrange items to help balance the load.
Unplug the washer and call for service.
Close the water taps, unplug the washer, and call
for service.
Close the water taps, unplug the washer, and call
for service.
Allow the washer to stand for 30 minutes to allow the
motor to cool; then restart the cycle. If the LE error
code still appears, unplug the washer and call for
service.
Restart the cycle.
Load the laundry products into the dispenser.
Always remove items from the washer as soon as
the cycle is completed.
Always wash dark colors separately from light colors
and whites to prevent discoloration. If possible, do
not wash heavily soiled items with lightly soiled
ones.
Always remove items from the washer as soon as
the cycle is completed.
The washer can be fully loaded, but the drum should
not be tightly packed with items. The door of the
washer should close easily.
Hot water rinse can set wrinkles in garments. Check
the inlet hose connections.
• Turn thetapon. If" "'-"
o_nc is not released, unplug
power plug and call for service.
5t