Specifications; Product Identification; Product Description; Parts Supplied - CAMPAGNOLA LIPO 550 Manual De Uso Y Mantenimiento

3. SPECIFICATIONS

3.1

Product identification

The unit identification details are shown in the CE compliance certificate in this manual and on the battery
back.
3.2

Product description

The power unit has been designed in order to power-supply some of the Manufacturer‟s electro-mechanical
tools. The tool compatibility with the battery has to be checked in the power-supply details inside the
corresponding manuals.
The unit is based on a battery set (2), a back-pack (3) and a connecting cable (1).
The power-supply unit is fitted with batteries with Lithium cells (2). An electronic card in the battery checks the
charging and discharging steps to improve performance and quality.
The battery is inside a box (picture A) and is hooked to a backpack (3) which is fitted with braces and worn by
the operator.
IMPORTANT!
The best performance as for the battery autonomy is reached after the first 20 working hours.
3.3

Parts supplied

Use and maintenance manual
Battery-charger with its own Use & Maintenance Manual
3.4

Recommended use

The unit was designed for pruning according to the manners and limits previously described.
WARNING!
• Any other use has to be considered improper and potentially dangerous for the operators' safety.
This would make any warranty claims void.
• If it is not used for the purposes it was designed for, the unit may cause serious injuries to
personnel and bystanders and damages to equipment and things.

3.5 Composition of the unit

POS. DESCRIPTION
1 Power-supply cable
2 Battery set
3 Battery backpack
4 ON-OFF switch
5 Recharge connector
3.6

Technical details

Battery weight: ................................................... 5,5 Kg............................................. 4,8 Kg
•
Battery voltage.................................................... 18,5 V............................................. 14,8 V
•
Battery: ............................................................... Li-Po ............................................. Li-Po
•
Average battery charge time: : ........................... 6-9 hours .........................................4-6 hours
•
Battery endurance: ............................................. 8 hours (*)....................................... 6-8 hours (*)
•
Automatic electronic battery charger model: ..... CLM850 ......................................... CLN 0406
•
(*) This detail depends on the kind of use, of tree and of connected tool
Campagnola Srl – USE AND MAINTENANCE MANUAL – Translation of the original Instructions
Rev.: 02, Date: 03/11/2016
FUNCTION
Connects the power unit to the battery
Operates the tool
Allows to carry the battery set
Operates the battery set
Allows to charge the battery set
LIPO720
PICT.
A
A
A
A
B
LIPO550
Pag.26