Garland SIOUX 655 MSG Serie Manual De Instrucciones página 44

English
fig. 1
Let the engine warm up for a few minutes before
starting to use the machine.
6.3.2.2. HOT ENGINE START
Place the machine on a flat and stable surface to start
it.
Raise the safety switch bar until it touches the handle.
Stand behind the mower as shown in fig. 1 and pull
the starter rope until the engine starts.
6.4. ENGINE STOP
Shut off the engine by releasing the safety switch bar.
6.5. TRACTION DRIVE
Press the traction bar against the handlebar as shown
in the figure, and the mower drive will come into
operation.
6.6. CHECKPOINTS AFTER STARTING THE MACHINE
It is important to pay attention to the possible
individual parts or and the temperature of the
machine. If you detect any anomaly in the machine
immediately stop and check it carefully.
In case of any malfunction or problem take the
machine to a service technician to be repaired.
Under no circumstances must you continue to use the
machine if the operation does not seem appropriate.
Do not use the machine if it is damaged or improperly
adjusted.
44/172