Trouble Shooting; Problem / Diagnostics/Solution / Suggestions - Bezzera HOBBY Manual De Instrucciones

MOD. BEZZERA HOBBY

7 - TROUBLE SHOOTING

Problem
The yellow switch light (1) does
not turn on
The machine does not reach
the ideal temperature, the green
light (3) does not turn on.
No coffee is made
Lack of steam distribution from
the pipe
Leakage from the filter holder
Difficult positioning of the filter
holder on the coupling ring
Incorrect positioning of the filter
holder after placing it on to the
group
The coffee dispenses insuffi-
ciently
Diagnostics/solution
The machine is not powered.
The safety thermostat was trig-
gered.
No water in the tank.
The steam pipe nozzle is obstruct-
ed, clear it by using a pin. This
problem depends on the introduc-
tion of the spout into the milk.
Possible causes:
1- The lower bowl gasket is
worn or encrusted.
2- The filter holder is positioned
incorrectly on the group.
3- The filter into the filter holder
is damaged.
The problem depends on the
excessive coffee dose inside the
filter holder.
The filter holder handle, after fix-
ing it to the group, is turned to
the right more than usual. The
lower bowl gasket is worn.
The coffee dispenses drop by
drop, the dispensing time is too
long, the quality of the coffee is
not good and presents a dark
cream.
Possible causes:
1- The coffee grind is too fine.
2- The coffee into the filter hold-
er is too pressed.
3- The dose into the filter holder
is excessive.
4- The small douche of the
group is obstructed.
5- The filter into the filter holder
is obstructed.
26
Suggestions
Make sure the plug is correctly
inserted and that the power
cord is not damaged.
Have the machine serviced by
a specialised technician to dis-
cover the cause.
Fill the tank.
Clean the steam spout after us-
ing it.
In all above-mentioned cases,
call a skilled technician.
Decrease coffee quantity in the
filter holder.
Contact a skilled technician to
replace the lower bowl gasket.
In cases 1-2-3, it is necessary to
adjust the grinder correctly.
In case 4,it is necessary to call a
technician.
In case 5,clean the filter or re-
place it.