Amoena Custom 300 Instrucciones De Uso página 8

ENG
breast forms and breast shapers adhere directly to the skin.
• The breast forms and breast shapers tolerate chlorine and salt water without any problems. How-
ever, they can pick up odours over time (e.g. your body odour or odours of external origin such as
chlorinated water), which can last for an indefinite period of time. Therefore, we recommend the
Amoena Aqua Wave for water sports activities.
• We do not recommend wearing breast forms or shapers in solariums (sunbeds and tanning beds),
saunas, steam baths or when diving.
General care instructions
• For the care of your Custom, we recommend daily washing by hand with the Amoena Soft Cleanser,
a mild soap or liquid detergent. It should then be rinsed with clean water and dried with a soft towel.
Body lotion, powder and natural body oils, can cause a film to form on the inside of the breast form.
• Please handle your Custom with care. Pointed or sharp items such as pins, animal claws, nail files,
scissors, etc. can damage the breast form. Breast forms made of lightweight silicone should be han-
dled with particular care in order to avoid damaging the lightweight silicone. Please do not press
these with your fingers and/or nails, just as you would not do with your skin.
• Any type of discolouration or staining cannot be removed. However, it will not have any affect on
the quality or function of the breast form.
• Some substances can damage the film coating of your Custom:
» Alcohols such as ethanol, propanol or butanol when used at the same time as organic, low-
molecular substances such as insect repellent (DEET) or sun cream
» Ethyl acetate and other esters
» Acetone
Wait until the substances have been absorbed and wash your hands before touching your breast form.
Disinfectants are permitted.
FOR CUSTOM WITH ADAPT AIR TECHNOLOGY (303 CUSTOM +++)
Custom with Adapt Air Technology contains an integrated air chamber, which can be individually
adjusted to fit the chest wall and the body's natural silhouette. A special pump is required to fill the
chamber with air or drain the air from the chamber. Small quantities of silicone oil, which can form
on the cannula of the pump, do not impair the function and quality of the breast form or pump. Simply
wipe away the oil with a clean cloth.
14
Adjusting the volume
4
3
2
1
1. Lay out the breast form and pump ready for use. Breast form and pump are separate.
Diagram 5 page 03.
2. Place the pump (1) under the bra strap on the opposite side so that you have both hands free. Pull the
bra strap off the shoulder of the operated side. Diagram 6 page 03.
3. Connect the pump by removing the grey tag (if present) and inserting the cannula (4) into the open-
ing (5) of the breast form marked with a white arrow. Open the valve inlet by gently squeezing your
thumb and index finger together. Guide the cannula completely into the valve.
Diagram 7 page 04.
4. Put the breast form into the bra cup. Ensure that the hose is connected correctly with the breast
form. Diagram 8 page 04.
5. Bring the bra strap back in the correct position. Diagram 9 page 04.
6. Now, adjust the breast form to your needs by pressing the pump ball (1). To drain the air, press the
black button on the drain valve (2) and lightly press the breast form against the chest wall. Diagram
10 page 04.
1. Pump ball
5
2. Drain valve
3. Hose
4. Cannula
5. Valve opening
ENG
15