Directions For Use
NOTE: For features with multiple settings, press the icon to move the setting one level higher. If the feature is set at the
highest level, pressing the icon will deactivate the feature or adjust it to a lower setting. The last setting used will be saved
for the next use.
(A) - Stop/Turbo: Press to stop any seat function that is currently running. You can also press with no functions in use to
start a massaging warm water spray with the spray wand oscillating back and forth.
(B) - Rear/Oscillate: Activates the rear wash feature. Press a second time to activate the oscillation feature. Operation will
stop automatically after about 90 seconds, and can be resumed by pressing the icon again.
(C) - Front/Oscillate: Activates the front wash feature. Press a second time to activate the oscillation feature. Operation
will stop automatically after about 90 seconds, and can be resumed by pressing the icon again.
(D) - Water Pressure: Press to change the pressure of the water spray. Adjust the water pressure to one of the four settings:
Off, Low, Medium, High.
(E) - Water/Dryer Temp: Press to separately change the water spray and dryer temperatures. Press to turn ON, OFF, and
adjust the water or dryer temperature while either feature is running. There are four temperature settings: Off, Low,
Medium, and High.
(F) - Seat Temp: Press to turn ON, OFF, and adjust the seat temperature. This feature has four temperature settings: Off,
Low, Medium, and High. As a safety precaution, the seat temperature will automatically change from High to Medium
after being operated at High for 10 minutes.
(G) - Power Saving: Press once for normal power savings. Press a second time to initiate super power savings. In normal
power-saving mode, the water temperature will be 77°F (25°C) and the seat temperature will be 82°F (28°C). In super
power-saving mode, the water and seat temperatures will be deactivated when the seat is not in use.
Kohler Co.
A
B
C
D
E E
F
G
H
5
I
J
K
1548727-5-A