GE Quick Set V Manual Del Usuario página 23

Special features of your oven control. GEApp,oncosc
Your new touch pad control has additional features that you may choose to use. The following are the features and how
you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain in the control's
memory until the steps are repeated.
To enter a special feature for either oven, you must first touch the BROff. HI/kO and BAKE pads at the same time.
When the display shows your choice, touch the START pad. The special features will remain in memory after a power
failure, except for the Sabbath feature, which will have to be reset.
!i i i i! i il iii
Fahrenheit or Celsius Temperature Selection
Youroven control is set to usethe Fahrenheit
temperature selections, b ut you may changethis
to usethe Celsiusselections.
[Z] Touchthe BROILH..I/LO and BAKEpads at
the same time untilthe displayshowsSF.
r_ Touchthe COOKING TIMEand BROILHI/LO
padsat the same time.Thedisplaywill show
F (Fahrenheit).
r_ Touchthe COOKING TIMEand BROILHI/LO
padsagain at the same time.Thedisplaywill
show C (Celsius).
r_ Touchthe STARTpad.
Tones at the End of o Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds
until the CLEAR/OFFpad is touched. This
continual 6-second beep may be cancelled.
To cancel the 6-second beep:
[Z] Touch the BROIL HI/LO and BAKE pads at
the same time until the display shows SF.
r2]
Touch the KITCHENTIMERON/OFFpad.
Thedisplay shows CON BEEP(continuous
beep).Touch the KITCHENTIMERON/OFF
pad again.The display shows BEEP. ( This
cancels the one beep every 6 seconds.)
r_ Touch the START pad.
23