GE Quick Set V Manual Del Usuario página 30

Cleaning the glass cooktop, con some models;
Clean your cooktop after each
spill, Use CERAMABRVTE ® Ceramic
Cooktop Cleaner.
Normal Daily Use Cleaning
ONLVuse CERANABRVTE ® Ceramic Cooktop
Cleaner on the glass cooktop. Other creams
may not be as effective,
To maintain and protect the surface of your
glass cooktop, follow these steps:
[]
Before using the cooktop for the
first time, clean it with CERAIVlA BRYTE ®
Ceramic Cooktop Cleaner.This helps
protect the top and makes cleanup easier.
r_ Daily use of CERAMABRYTE ® Ceramic
Cooktop Cleaner will help keep the
cooktop looking new.
@
Shakethe cleaning cream well. Apply a
few drops of CERAMABRVTE ® Ceramic
Cooktop Cleanerdirectly
to the cooktop.
r-_ use a paper towel or CERAMABRYTE ®
Cleaning Pad for Ceramic Cooktops to
clean the entire cooktop surface.
r51 use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
thoroughly.
Use a CERAMA BRYTE® Cleaning
Pad for Ceramic Cooktops.
Burned-On Residue
NOTE: DAMAGE to your glass surface may
occur if you use scrub pads other than those
recommended.
rT] Allow the cooktop to cool.
[] Spread a few drops of CERAiVlA BRYTE ®
Ceramic Cooktop Cleaneron the entire
burned residue area.
%
Using the included CERAMABRYTE ®
Cleaning Pad for Ceramic Cooktops, rub
the residue area, applying pressure as
needed.
%
@
If any residue remains, repeat
the steps listed above as needed.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMABRVTE ®
Ceramic Cooktop Cleaner and a paper
towel.
The CERAMABRVTE ® Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts
Center. See instructions under "To
Order Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
F71
A llow the cooktop to cool.
Use a single-edge razor blade scraper
at approximately a a,5° angle against
the glass surface and scrape the soil. It
will be necessary to apply pressure to
the razor scraper in order to remove
the residue.
%
After scraping with the razor scraper,
spread a few drops of CERAMABRYTE ®
Ceramic Cooktop Cleaner on the entire
burned residue area. Use the CERAMA
BRVTE ® Cleaning Pad to remove any
remaining residue.
%
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMABRYTE ®
Ceramic Cooktop Cleaner and a paper
towel.
30