Suntec Wellness KLIMATRONIC CoolBreeze 12000 TV Manual Del Usuario página 11

Button:
1. Power: plug in the plug, and press
will illuminate, the LED will display the related status, and press
all lights are shut up.
Speed: When the appliance is working press this button you can select your desired wind's speed ,
3.
it have 3 speeds (low , middle , and high), the LED will display the related status.
Low
3. Osc: Press this button, you can set the oscillation function, the light of button will illuminate, the LED
will display the related status, press it again, the appliance will stop oscillation, the related light will shut up.
ON
Oscillation
4. Timer: Press this button, you can set your desired time (1-12hr), and the button of it will illuminate,
the LED will display the relate status.
5. Nature wind and sleeping wind selection: Press this button, you can select Nature wind or
Sleeping wind , the LED will display the related status.
About the remote control:
1. When you use the remote control for the first time, pull out the insulation pad which is located in the back of
the remote.
2. The remote control works within 5m, if the remote does not face to the appliance's signal receiver, the
distance will be short. So the remote should be face to the signal receiver.
3. Do not put anything between the remote and the signal receiver.
4. If you use the appliance in the room which have some high power appliance is working, the remote maybe
, the fan will work in "low" speed. The light of the temperature and speed
Middle
OFF
OFF
Revoke
again, the appliance will stop working, and
High
ON
Oscillation