Publicidad
Idiomas disponibles
Idiomas disponibles
10
Applying voltage
Insert the fuses and check if the output circuits have been connected correctly.
DANGER
Danger of electrocution!
In emergency operation the system is supplied with 48 V DC. Coming into contact with voltage-carrying
parts of the system may lead to death or severe injury.
w
Relevant health and safety regulations must be observed.
w
Work can only be carried out on the system by authorised personnel wearing appropriate protective
clothing.
w
Lay current-carrying lines, signal and control lines in accordance with relevant applicable guidelines
and standards.
Inserting fuses
1. Insert the fuse on the nBox ACM.
2. Insert the battery fuses.
3. Close the mains fuse provided on site for the nBox system, switch on the mains switch on the nBox system.
Ü
The nBox is supplied with voltage.
Ü
The system is in a preconfigured state. The output circuits are switched off.
Apply voltage: check the connection of the output circuits,
insert fuses
nBox, Quick commissioning 2.0 | 07.2022 | en
Applying voltage
EN
Done
17
Publicidad
