Publicidad
Idiomas disponibles
Idiomas disponibles
Scooter Operation
Always wear an approved helmet, eye protection, shoes and for inexperienced riders, we
further recommend gloves, knee and elbow pads.
Before riding, be sure to have a clear unobstructed level path ahead of the rider. Firmly
grab the handlebars with both hands. Place one foot onto the platform. Go ahead and
push off with the other leg like riding any other foot scooter. Simultaneously, engage the
motor by simply depressing the accelerator, located on the right-hand side of the
handlebars. You will feel the power of the motor as you begin to raise the other leg off the
ground. To disengage or slow/stop,depress the brake, located on the left-hand side of the
handlebar. As you become a more skilled rider and familiarize with you new electric
scooter, you will begin to use a combination of brake and power to achieve optimum
operation. Be sure to recharge the batteries after using.
Charging the Battery
WARNING:Battery must be full charged before you ride your electric scooter.
Required components: Charger
● Initial battery charge time 8 hours.
● Charge after the first charge up to 6 hours.
● When the scooter is not in regular use the batteries need to be charged monthly to
maximize their performance.
1.Make sure that the switch is in the off
position before plugging in the charger.
Insert the charger into the charge close
on the right side of the battery case.
WARNING: Do not use this product for the first time until you have loaded the
battery for at least 8 hours.
Failure to follow these instructions may damage the product.
Note: Batteries must be recharged at least once a month, even when the scooter is
not being used. Failure to do so may result in your batteries no longer recharging.
2. Plug the charger into a wall outlet.
The light on the charger case will
illuminate.
The Red Light indicates that the
battery is charging.
The Green Light indicates that the
battery is fully charged.
12
Publicidad
