Descargar Imprimir esta página

HOMCOM AA1-056 Manual De Instrucciones página 13

Ocultar thumbs Ver también para AA1-056:

Publicidad

Idiomas disponibles

Idiomas disponibles

Equipment Maintenance
Brakes
Check that the brakes are working correctly. When pressing the lever, the brake must
provide a positive braking action. When applying the brake with the speed control on, the
brake switch must stop the engine. Make sure the brakes are not skidding.
Frame, Fork and Handlebar
Check for cracks or broken connections. Although it is rare for frames to break, it is
possible for an aggressive driver to crash into a curb or wall and double or break the
frame. Acquire the habit of inspecting your motorcycle on a regular basis.
Wheel
Periodically inspect the wheels for excessive wear.
Safety equipment
Always wear the appropriate protective equipment as an approved safety helmet. Elbows
and knee pads are recommended. Always wear athletic shoes (high-laced sneakers with
rubber soles), never ride barefoot or with sandals, and always keep the laces tied and
away from the wheel system, engine and unit.
Battery
Make sure that the power switch is OFF when the motorcycle is not in use. Never store the
product in temperatures below freezing or below freezing.
If it freezes, the battery will be permanently damaged.
Before Mounting
Before mounting always check the following:
Safety equipment
Always wear appropriate protective equipment such as:
● Safety helmet approved. (Hull may be legally required by local law or regulation in your
area.)
● Elbow and knee pads.
● Long-sleeved shirt, long pants.
● Gloves.
● High-heeled shoes with rubber sole.
Brake
Check the brakes are working properly. When tightening the brake lever, the rear wheel
must be reduced / stopped without undue strain. When applying the brake with the
accelerator on the brake switch must stop the engine. Make sure that the brakes are not
skidding when the lever is not being tightened. Do not ride the scooter if the brakes are
not working properly.
Throttle
Once the ignition switch is in the "ON" position, the scooter will move when the throttle is
twisted. Make sure that before the throttle is twisted that you are in an open and safe
place to walk, that this in balance on the motorcycle and have both hands on the handles
of the handlebar.
Wheel
Inspect wheels for excessive wear and replace if necessary.
13

Publicidad

loading

Este manual también es adecuado para:

Aa1-056v02Aa1-077Aa1-056rdAa1-077bkAa1-056bk