Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
3. Attaching the Center Fireplace Surround
• Locate the Top Partition Rail (H).
• Align the Top Partition Rail (H) between the Left
and Right Surround Rails that are now attached
to the Left and Right Partitions (C and D). Push
together, inserting the pre-installed dowels on the
Top Partition Rail (H) into the holes on the Left and
Right Surround Rails attached to the Left and Right
Partitions (C and D) as shown.
• Rotate the pre-attached metal plate bracket behind
the top surround rail to span the joint of the top
surround rail and side surround rail.
• Secure the surround bracket with a Screw (AA).
• Repeat to secure both sides.
Hardware Used
Ø3x12mm
AA
Screw
4. Assembling the Fireplace
• Locate the Front Panel with Control Button (EA).
• Using Screws (BB), secure the Front Panel with
Control Button (EA) between the Left and Right
Partitions (C and D) and just below the Top
Surround Rail as shown.
Hardware Used
Ø3.5x12mm
BB
Screw
5. Attaching the Door Catch
• Locate the Fixed Shelf (I) and place on a flat
surface.
• Attach the Magnetic Door Catches (CC) to the
Fixed Shelf (I) using Screws (DD) where
indicated by the diagram.
Note: Do not tighten the screws in this step. After
assembling the doors in step 23, adjust the
position of the magnets forward or backward
to better match the doors to the unit, and then
tighten the screws.
Hardware Used
CC
Magnetic
Catch
Ø3x15mm
DD
Screw
23MMP723REV1.0
x 2
x 5
x 2
x 4
10
3
D
4
EA
5
C
H
I
Publicidad
