Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
15. Attaching the Side Panels and Top Rail
• Locate the Left and Right Side Panels (M and N)
and align on each side of the main assembly.
• Insert the pre-installed screws on edges of the
Base, Fixed Shelf, and Top Rail (L) into the pre-
drilled holes on the Left and Right Side Panels (M
and N).
• Secure the panels in place by tightening the
fasteners with a Phillips screwdriver as shown.
16. Attaching the Base and the Base Back Panel
• By inserting Bolts (EE) through the holes in the
Plastic Connectors Block (RR) and tighten.
Hardware Used
Ø6.3x12mm
EE
Bolt
17. Connecting the Leveling Foot
• Align the screw holes underneath the base with
the screw holes on the edges of the Leveling
Foot (O) plate. Secure screws (II) around on
the leveling foot with a Phillips screwdriver.
Hardware Used
Ø4x25mm
II
Screw
23MMP723REV1.0
x 6
x 4
14
15
L
L L
M
M M
16
17
N
N N
O O
O
Publicidad
