Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
12. Attaching the Base Back Panel
• Locate the Base Back Panel (V).
• Align the pre-installed screws on the edge of the
Base Back Panel (V) with the pre-drilled holes on
the bottom of the Base (A).
• After inserting the screws into the holes,
tighten the fasteners using a Phillips screwdriver
as shown.
13. Attaching the Base
• Align the holes on the edges of the center
assembly with the holes on the Base (A).
• Insert Screws (FF) through the Base (A) and into
the pre-drilled holes on the edges of the center
assembly as shown. Securely tighten all screws
using a Phillips screwdriver.
Hardware Used
Ø4x50mm
FF
Screw
14.Attaching the Back Panels
• Locate the Side Back Panels (K).
• Slide the Side Back Panels (K) into the grooves
in the fixed shelf and base as shown. Slide all
the way in until the Side Back Panels (K) meet
the fireplace assembly in the middle.
23MMP723REV1.0
12
A A
A
13
x 4
14
13
V
V V
K
A
K
Publicidad
