Marantz SX-72 Guia Del Usuario página 7

CONNECTIONS
CD player
To output jacks
OC 4c Ooo
a 00
=
Stereo tuner
Oo
To PHONO output
jacks To speaker
terminals
Connect the output
cables from the turntable.
Analogue disc turntable
CARE AND MAINTENANCE
This section describes the care and maintenance tasks that
must be performed to optimize the operation of your Marantz
equipment.
CLEANING OF EQUIPMENT EXTERNAL SURFACES
The exterior finish of your SX-72 will last indefinitely with
proper care and cleaning. Never use scouring pads, steel
wool, scouring powders or harsh chemical agents (e.g., lye
solution), alcohol, thinners, benzine, insecticide or other
volatile substances as these will mar the finish of the
equipment. Likewise, never use cloths containing chemical
substances. If the equipment gets dirty. wipe the external
surfaces with a soft, lint-free cloth.
If the equipment becomes heavily soiled:
— dilute some washing up liquid in water, in a ratio of one
part detergent to six parts water
— dip a soft, lint free in the solution and wring the cloth out
until it is damp.
— wipe the equipment with the damp cloth.
— dry the equipment by wiping it with a dry cloth.
Stereo amp with
built-in DAC
To speaker
terminals
Connect the right channel speaker system to
the R output terminal, and the left channel
speaker system to the L output terminal.
DCC, tape deck, etc.
To mains power outiet
ree PCE P IST it ir rrriri iti
To AUX INPUT :
A jacks PRE OUTPUT :
: Power INPUT ? To AUX
: : INPUT
To speaker
terminals
When you use your integrated amplifier as phono pre-
amp (in other words when you have connected your
turntable to the integrated amplifier), please connect the
PROCESSOR- or TAPE outputs of the amplifier to the
analogue inputs of the SX-72.
Connect the analogue outputs of the SX-72 to the
PROCESSOR- or TAPE inputs of the amplifier. Push
TAPE or PROCESSOR to listen via the SX-72.
REPAIRS
Only the most competent and qualified service technicians
should be allowed to service the equipment. The Marantz
company and its factory-trained warranty station personnel
have the knowledge and special facilities needed for repair
and calibration of this precision equipment. After the warranty
period has expired, repairs will be performed for a charge if
the equipment can be returned to normal. operation.
In the event of difficulty, refer to your dealer or write directly to
the nearest location to you that is listed on the Marantz
Authorised Service Station list. If writing, please include the
model and serial number of the equipment together with a full
description of what you think is abnormal about the
equipment's behaviour.