Publicidad
Fig.4D
Fig.4E
Fig.4F
5.3.2 ASSEMBLE THE GRASS CATCHER BAG TO THE FRAMEWORK
1. The grass catcher is not assembled completely in the package (Fig.4G).
2. Open up the reinforced rim on the three sides by hand or using a screwdriver. Wrap and then clench the
reinforced material around the metal support brackets on the three sides to secure the bag in position. (Fig.4G)
3. Make sure the grass catcher is completely assembled. (Fig.4H)
Fig.4G
Fig.4H
5.3.3 ASSEMBLE THE GRASS CATCHER TO THE MOWER
1). To fit: Raise the rear cover and hitch the grass catcher on rear of mower. (Fig.4I/Fig.4J/Fig.4K)
2). To remove: grasp and lift the rear cover, remove grass catcher.
Fig.4I
Fig.4J
Fig.4K
5.4 ASSEMBLE THE SAFETY KEY (ONLY FOR DYM101902)
1. Lift the battery door. (Fig.5A)
2. Insert the isolator key into the slot. Fig. 5B
Isolator key
Fig.5A
Fig.5B
5.5 INSERT THE BATTERY
132
Publicidad
