Publicidad
Fig.7D (DYM101902)
6. ADJUSTMENT OF CUTTING HEIGHT
1. Apply outward pressure to disengage lever from rack (Fig.8A). Move lever forward or back to adjust height
(Fig.8B).
2. The height (the blade to the ground) can be adjusted from 25mm (position 1) to 75mm (position 5), 5 height
positions. All wheels should be in the same height of cut.
1
5
Fig.8A
Fig.8B
WARNING: Make this adjustment only when the blade is stopped.
7. SAFETY PRECAUTIONS
a) Always operate with the deflector or grass catcher in the correct position.
b) Always stop the motor before removing the grass catcher or adjusting the height of cutting position.
c) Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While
mowing, stay alert for any foreign objects which may have been missed.
Fig.9A
d) Never lift the rear of the mower while starting the motor or during normal operation.
Fig.9B
e) Never place your hands or feel underneath the under pan or into the rear discharge chute while the motor is
running.
Fig.9C
Fig.9A
134
Publicidad
