Publicidad
Fig.9B
Fig.9C
8. OPERATING INSTRUCTIONS
8.1. STARTING
Assemble battery as part 5.5 described.
For DYM 100901 and DYM101301, Insert the on-off button (Fig.10A).
For DYM101902, Turn the isolator key from position "0" to position "1" shown as Fig.10B.
Start the motor as follows:
1. Press the On-off button. (Fig.10C)
2. And meanwhile, grasp the brake control handle, and keep it in grasp. (Fig.10C)
If you release the brake control handle, the motor will stop.
Fig.10A
Fig.10B
Fig.10C
CAUTION! The blade starts turning as soon as the motor is started.
WARNING! Cutting elements continue to rotate after the motor is switch off.
8.2 LED
135
Publicidad
