Descargar Imprimir esta página

Craftsman 172.74536 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

EXTENSION
CORDS
Use a proper extension
cord. ONLY use cords listed by Underwriters
Laboratories
(UL). Other extension
cords can cause a drop in line voltage,
resulting in a loss of power and overheating
of tool.
For this tool an AWG (American
Wire Gauge) size of a least 14-gauge
is
recommended
for an extension
cord of 25- ft. or less in length. Use 12-gauge
for an extension
cord of 50-ft. Extension
cords 100-ft.
or longer
are not
recommended.
Remember,
a smaller
wire gauge size has greater capacity
than a larger
number
(14-gauge
wire has more capacity than 16-gauge wire; 12-gauge wire
has more capacity than 14-gauge).
When in doubt use the smaller number.
When operating
a power tool outdoors, use an outdoor
extension
cord marked
"W-A" or "W". These cords are rated for outdoor
use and reduce the risk of
electric
shock.
I Z_ CAUTION:
Keep the extension
cord clear of the work area.
Position
the cord
so that it will not get caught
on bushes,
hedges,
tree trunks,
lawnmowers
or other obstructions
while you are working
with the trimmer.
I A WARNING:Check
extension
cords
before
each
use. If damaged
replace
immediately.
Never
use tool with a damaged
cord since
touching
the damaged
area could
cause
electrical
shock,
resulting
in serious
injury.
The label on your tool may include the following
symbols.
V .................................................................
Volts
A ................................................................
Amps
Hz ..............................................................
Hertz
W ................................................................
Watts
rain ......................
......................................
Minutes
,%, ..............................................................
Alternating
Current
............................................................
Direct Current
no ..............................................................
No-load Speed
[] ................................................................
Class II construction
.../rain ........................................................
Revolutions
or Strokes per minute
Z_ ...............................................................
indicates
danger, warning caution.
It means attentioni
Your safety is involved.
7

Publicidad

loading