Bose QuietComfort Ultra Instrucciones De Uso Y Seguridad página 19

CHANGE THE STABILITY BANDS
1. Holding the earbud, gently grab the stability band scoop and peel the band toward
you, over the eartip, and away from the earbud.
Stability band scoop
Stretch
CAUTION: To prevent tearing, do NOT pull on the thin part of the band.
2. Choose a new band size (see page 17). Select the band marked with either an R
(right) or L (left), depending on the earbud.
3. With the band markings facing you and the band scoop facing away from you,
align the dot on the band with the gray dot on the bottom of the earbud.
4. Gently stretch the band over the eartip, making sure the dots align and the tab on
the band fits in the notch on the top of the earbud.
NOTE: Aligning the band correctly makes sure that the hole on the side of the
band is over the earbud microphone so the microphone isn't blocked.
5. Press down until the band fits securely into place, then check for alignment.
Stability band dot
Earbud dot
Align
H OW TO W EA R
Peel
Microphone
Hole
Stretch
|
1 9 E N G
Separate
Check