Technical Characteristics; Electrical Installation; Electrical Risk - TRAPP TR 500 Manual De Instrucciones

Specifications
Cutting disk diameter (cm)
Cutting disk width (cm)
Cutting disk (rpm)
Number of hammers
Motor power (cv)
Gasoline motor power (hp)
Tractor minimum driving power (hp)
Length without handle (m)
Width (m)
Height (m)
Weight (kg)
Maximum driving power (rpm)
Produtcion (m /h)
3
Noise
Noise measurement is made according to
 
noise technical standards applicable to the
work place and according to the following
parameters:
Measurement at the front of the machine,
 
1.6 m height, and at 1.0 m from central
opening.
The following levels of noise were obtained:
 
Neutral: 94 dB (A)
 
Full load: 104 dB (A)
 
Attention!
Wear ear protection when using our
shredder.
50

Technical Characteristics

TR 500
12.5 to 15
13 to 16
3 to 5
TR 500T
35 35
24 24
2400 2400
34 34
–
–
– 16
1.90 1.90
1.70 1.70
1.61 1.61
210 175
– 540
3 to 5

Electrical installation

Electrical servicing shall be done by
 
specialized electricians!
Mechanical risk
All movable parts (e.g. disk, hammers,
 
belts) that offer continuous danger shall be
removed with safe tools.

Electrical risk

All parts of the machine that are connected
 
to electrical current shall be insulated and
serviced with adequate tools.
www.trapp.com.br
TR 500E TR 500G
35 35
24 24
2400 2400
34 34
12.5 –
– 13.5
– –
1.90 1.90
1.70 1.70
1.61 1.61
275 275
– –
3 to 5 3 to 5