Publicidad
Idiomas disponibles
Idiomas disponibles
4 - Function description
4.1- Operating functions
Schémas
Fonctions
On/Off
Running status
display
Adjust the head
Lock/unlock
screen
Wake up
Adjusting method
After electric pump is installed and
powered up, press the "On/Off' key,
and the water pump will start running;
conversely, the electric pump stops
running.
ln the normal operating conditions,
press the "Setting" key ( ) repeatedly
to switch back and forth among
operating data, and stop at the data
to be displayed; it will switch to the
display of current pressure after 10s of
no operation.
ln the normal operating conditions,
press "+ key" and "- key" to adjust
head of water pump. Press once to
adjust it by 1m, or move the touch
slider left and right to quickly adjust the
head.
ln the normal operating status, long
press the screen Iock key for 3
seconds, and all the lights turn off and
only the screen Iock light is on.
When the screen is locked, long press
the screen Iock key for 3 seconds to
unlock it. ln case of any fault, it will
automatically exit the locked status and
display the fault code.
Press any key to wake up the panel,
and the panel lights will turn off after
the current running status is displayed
for 3 seconds.
Description
After electric pump runs
normally, the following
parameters can be
displayed:
Current head: H (m).
Set head: d (m).
Input power: P (W).
Input voltage: U (V).
Current speed: (r/min.)
Accumulated running
days: t (d).
Software version: U-
Level display area.
Two bars are displayed
for 10-15m, four bars are
displayed for 16-23m, six
bars are displayed for 24-
31m, and so on.
Note: The adjustable range
of head is 10-60m, and the
default setting is 30m.
Corresponding fault
symbol will light up in case
of failure.
Corresponding fault
symbol will light up in case
of failure.
GB
Publicidad
