Descargar Imprimir esta página

WORXNITRO WG325 Manual Del Usuario página 22

Publicidad

Idiomas disponibles

Idiomas disponibles

7. TROUBLESHOOTING TABLE
The following table gives checks and actions that you can perform if your machine does not operate
GSVVIGXP] -J XLIWI HS RSX MHIRXMJ]VIQIH] XLI TVSFPIQ GSRXEGX ]SYV WIVZMGI EKIRX
WARNING: Switch off and remove the battery pack before investigating fault.
Symptom
Possible Cause
Chainsaw
Battery charge
fails to
is depleted.
operate
Over heating
Applying too
much pressure
while cutting.
Loose
Chainsaw
connection.
operates
Internal wiring
intermittently
defective.
3RSJJ 8VMKKIV
defective.
Debris is
clogged
between chain
and housing
cover.
22
22
Chain is over
tensioned
'LEMRGLEMR
Chain is not
bar over-
properly oiling.
heats
Oil reservoir
may be empty
Chain tension
too loose
Chainsaw
Dull chain
rips,
Chain worn out
vibrates,
does not saw
Chain teeth are
properly
facing in the
wrong
direction
Cordless Pruning Saw
Charge the battery pack.
Temporarily stop usage and let the tool cool down in a cool, ventilated
location.
Apply relatively less pressure while cutting
Contact service agent 1-866-354-Worx (9679).
6IQSZI FEXXIV] 6IQSZI LSYWMRK GSZIV ERH GPIEVHMWPSHKI ER] HIFVMW
XLEX QE] LEZI EGGYQYPEXIH FIX[IIR XLI FEVGLEMR ERH LSYWMRK GSZIV
%HNYWX GLEMR XIRWMSR
Add oil to oil reservoir. If it is still not oiling, remove battery and check
to ensure the oil outlet is clear of debris.
%HNYWX GLEMR XIRWMSR
Sharpen chain or replace
Replace chain
Reassemble with chain in correct
direction
Remedy
EN

Publicidad

loading

Productos relacionados para WORXNITRO WG325

Este manual también es adecuado para:

Wg325.x