Intended Use
This instrument is intended for use in pharmacies, schools, businesses and light
industry. It must only be used for measuring the parameters described in these
operating instructions. Any other type of use and operation beyond the limits of
technical specifications, without written consent from OHAUS, is considered as not
intended. This instrument complies with current industry standards and the recognized
safety regulations; however, it can constitute a hazard in use. If the instrument is not
used according to these operating instructions, the intended protection provided by the
instrument may be impaired.
3. INSTALLATION
3.1 Select the Location
Avoid heat sources
3.2 External Connections
Battery Power Supply
3 AA size dry batteries can supply power to the scale. And the dry batteries are not in
the packing list.
AC Power Supply
To supply power, you can connect the AC Adapter to the power receptacle, then plug
the AC Adapter into an electrical outlet.
4. OPERATION
4.1 Overview of Controls and Display
Controls
Rapid temperature changes
Air current or
excessive vibrations
EN-3
Allow sufficient space