TRAPP MB 51E Manual De Instrucciones página 49

www.trapp.com.br
The cutting blade keeps moving after the
 
equipment is switched off. Therefore be
aware of that when servicing.
Never use a water jet to clean the equipment, as it
 
can damage the electric circuits of the engine. Use a
damp cloth and neutral detergent.
Recommendations on use, type and maximum
 
length of extension cord to be used (see "Table for
the Correct Use of the Extension Cord") (cords follow
Standard ABNT NBR NM 60335-1, clause 25.7).
Additional Safety and Operation Instructions
Carefully read instructions and get familiar with the
 
controls and proper use of the equipment.
Remember that the operator or user is responsible
 
for any accident or damage involving third parties
or their property.
To mow the grass at the desired height and get
 
optimum performance from the grass mower, use
one of the 9 settings.
Do not allow grass to build up under the grass
 
mower base.
Preserve your equipment. Frequently check if
 
the movable parts are fixed, if any component is
damaged or check for any other condition that may
affect its optimum operation. Should any problem
arise, fix it before using the equipment. Many
accidents are caused by lack of proper maintenance.
When the grass is very high, cut it in stages using the
 
adjustment system, so as not to overload and burn
out the engine.
Always be careful with your steps in inclined areas
 
(slopes and small elevations).
Be really careful when changing direction on slopes
 
(mountain slopes and small hills).
Wear non-skid footwear in inclined areas.
 
Do not mow extremely steep slopes.
 
Pay attention when you turn around and when you
 
pull the mower in your direction.
Start the motor with the cutting blade free.
 
Do not start the mower directly on the grass.
 
4 - Service
According to
 
"maintenance must only be carried out
by qualified, skilled professionals or
authorized to do so". Use original parts
only. Always call TRAPP Authorized Service
Technicians. TRAPP is not responsible for
possible accidents caused by the use of spare
parts that are not original.
Wait for the motor to reach the ideal rotation.
 
Switch the motor off by releasing the command key
 
lever, unplug the machine, and wait for the blade to
come to a stop:
To transport or move the machine;
O 
To maintain, clean and inspect the cutting
O 
blade;
Clear the grass exit from the mower to the grass
O 
catcher;
To check for damages when a weird object hits
O 
it, and to make repairs before switching it on
again;
When the mower vibrates too much; blade
O 
likely to be unbalanced.
Switch the lawn mower off and wait for the blade to
 
come to a stop when going through a surface that
has no grass, an obstacle, when adjusting the cutting
height and before removing the grass catcher.
Always keep the mower base grass exit to the grass
 
catcher unobstructed.
Neither lift nor carry the mower when the motor is
 
on.
Use the equipment according to the instructions
 
in this manual. Take into account the working
conditions and the job to be done.
Using the equipment for activities not covered in this
 
manual may result in dangerous situations.
This grass mower is equipped with a fourcycle
 
explosion motor - It does not use oil mixed with
the gasoline.
NR12, item 12.135,
49