Cutting Height Adjustment - TRAPP MB 51E Manual De Instrucciones

www.trapp.com.br
The cutting height is adjusted as follows:
Bend the adjustment rod in the direction of the
 
wheel (1) to unlock it. After that, move it either to
the right or to the left (2), according to the height you
wish.
There are 9 positions to mow the grass at the desired
 
height and for the grass mower to move freely.
1
Attention!
When adjusting the cutting height, turn off the
motor and check whether the cutting blade is
still turning before carrying out the adjustment.
To avoid engine overload, select the cutter edge
 
height according to yard condition.
For the types of grass used in Brazil, it is
 
recommended to keep them 2 and 3 cm high
from soil. If lawn is excessively high, perform 2 or
more cutting with different height adjustments. This
procedure will help to improve equipment life.
According to cutter model (with or without grass-
 
holder, with side outlet), use a cutting sense as
shown in the illustrations below.

Cutting Height Adjustment

2
Machines with grass-holder - Clockwise sense.
Machines with grass-holder and side outlet -
Anti-clockwise sense.
If your lawn is very high, avoid overloading the
 
engine by using only half of cutter cutting range, as
shown below.
59