Troubleshooting - EINHELL GE-HM 38 S-F Manual De Instrucciones

10. Troubleshooting

If the equipment is operated properly you should experience no problems with malfunctions or faults.
In the event of any malfunctions or faults, please check the following before you contact your customer
services.
Problem
Unusual noises
Unsatisfactory
cutting results
Anl_GE_HM_38_S_F_SPK7_USA.indb 11 Anl_GE_HM_38_S_F_SPK7_USA.indb 11
Possible cause
- Loose screws/parts?
- Foreign bodies in the blade?
- Damaged blade?
- Wrongly adjusted bladed?
- Wrongly adjusted bladed?
- Blunt blade?
EN
- Tighten the screws
- Remove the foreign bodies
- Have the blade replaced
- Set the counter blade (see 7.2.1)
- Set the counter blade (see 7.2.1)
- Have the blade sharpened or replaced
- 11 -
Remedy
17.12.2018 17:18:46 17.12.2018 17:18:46